Здравствуйте, Уважаемые дамы и господа. Мировое население растет с каждым днем, в 2000 году оно увеличилось на 1,33%, в 2010 году на 1,24%, в 2017 году на 1,12% , а в 2020 году по следуемой статистике оно должно увеличиться на 1,09%. Мировое население быстро растет, а доступ к продовольствию становится все более сложным. Производство продуктов питания должно увеличиться в среднем на 60-70 процентов, чтобы избежать трудностей с доступом.Мы разрабатываем и внедряем современные системы теплиц, при помощи которых выращивание овощей становится возможным даже при плохих погодных условиях летом и зимой, получая при этом овощи более высокого качества. Наша компания MAY SERA внедряет всевозможные проекты,используемые в сельском хозяйстве.  Наша компания, организованная в 2004 году в городе Анталия / Турция, начала свою деятельность по производству стальных конструкций гостиниц, санаториев, бизнес-центров, а также стальных деталей, включая процесс сборки. Находясь в регионе Анталии, и имея при этом семью фермеров, на  Sera Bitki Askı Tel Sistemleri Sera Projelendirme safhasında hesaplamalar homojen yük dağılımı esas alınarak yapılır.     Sera Projelerimizde 4mm kalınlığında bitki askı teli ve projeye göre 8mm veya 10mm halat kullanılır.    MAYÇELİK MAYPOLAT MAYYAPI MAYSTELL

Home Page


     Greenhouse System

   
Product code : glass greenhouse 8m
Producer : MAY SERA
Product features
8m glasshouse system
 Order        Detail
 
 
Detail

Construction of the greenhouse was calculated as per TS EN 13031-1 A 15 standards.

The whole steel construction is hot-dip galvanized. Assemblies will be carried out via steel fibre bolts.

Column/foundation connections will be provided by 50*100=4mm anchorages. Aluminium roof will consist of specially formed elements.

1. It is a high volume model with butterfly window, high ventilation rate, aluminium gutter, and designed as per our country's climate conditions.

2. Carrier components such as column, beam are manufactured of hot-dip galvanized steel, while glass rafters and windows are of aluminium.

3. The system includes drainage - discharge channels for perspiration waters, and mini condensation gutter, while windows have anti-iksekt tulle bearings.

4. It is designed for easy application of heat curtain - shading and fly screen systems.

5. It is designed as per heat protection and insulation rules, have high technology and fully domestic design and is manufactured by us.

            

ANCHORAGE PROFILES

They consist of 50x100x4mm box profiles.

 

 

 

 

GREENHOUSE POSTS

Posts around the greenhouse will be produced of first class galvanized iron of 60x120x3 mm dimension, while posts inside the greenhouse of first class galvanized iron of 80x120x3 mm dimension.

                                              

ROOF

ALUMINIUM ROOF ELEMENTS

(For Aluminium gutter and 4 mm glass) It is certified with ISO 9001 and produced in a quality in complying with (TSI) standards, and provides high resistance on the structure.

1) ALUMINIUM RIDGE PROFILE 

It is located at the highest point of the structure, simultaneously supports the roof and enables ventilation to run smoothly. Furthermore, there are wind tie bearings, and ties are easily connected without use of any additional materials.

2) ALUMINIUM UPPER WINDOW PROFILE

It is easily put on bearings located on the ridge, and functions as a hinge on ventilation. It provides a high safety by deep glass bearing on it.

3) ALUMINIUM LOWER WINDOW PROFILE

It is assembled in parallel with the ridge and hinge. Its duty is to safely open and close the ventilation, and to prevent harmful insects from going in without using an additional material through fly screen bearing formed on it. Furthermore, it perfectly preserves the air and heat insulation in the structure by EPDM rubber bearing on it.

4) ALUMINIUM WINDOW INTERMEDIATE SUPPORT PROFILE

It is affixed vertically to window lower and upper profiles. Its duty is to enable fastest and safest attachment of glasses by safe EPDM rubber bearing on it.

5) ALUMINIUM ROOF SUPPORT PROFILE

It is the most important part of the roof, and operates simultaneously with all profiles. Its duty is to enable the roof to be structured in the safest and fastest way possible. In addition, it enables fixed glasses on the roof to remain safely.

         

GUTTERS

TAILORED RAIN GUTTERS AND CONDENSATION WATER COLLECTION SYSTEM

Original aluminium closed type gutters will be used against heavy rains.

There are drainage channels through which roof condensation waters are collected and discharged through gutter special side forms. Drainage channels are available in rain gutters and side skirt profiles for collection and discharge of perspiration waters condensed on roof inner surface and on side wall glass surfaces. Perspiration waters are collected and drained outside the greenhouse by these channels.

GENERAL QUALITIES OF THE CONSTRUCTION

 

 

Our offer has been calculated as per snow and wind load based on regional conditions of the area where the greenhouse is located. Quantity, piece, length in meters and technical details of materials to be used, and projects regarding the subject matter will be provided in addition to the contract.

                All greenhouse materials went through the hot-dip galvanized process.

 

 

* Wind load

Wind load of our greenhouse is 120 km/h as per the standards.

* Snow load

Calculated as 50kg/m2.

* Product Load

Calculated as 37kg/m2.

* Accessory Load

17kg/m2

 

6) ALUMINIUM SIDE AND FRONT SKIRT PROFILE

This the part of structure's side and eaves walls above the concrete.  Its duty is to enable side and eaves glasses to be swiftly and safely assembled. It supports the glasses in the tightest way possible through EPDM rubber bearings on it.

8) ALUMINIUM SIDE GLASS SUPPORT BAR

It is used in side and eaves walls of the structure. Its functions is to enable side and eaves glasses to be swiftly and safely structured with EPDM rubber bearing on high sections of the structure.

9) ALUMINIUM GLASS BEARING PROFILE

It holds the fixed glasses on the roof, and enables fly screen to be installed by the fly screen bearing on it.

VENLO MODEL QUALITIES:

With bidirectional butterfly ventilation VENLO type 22º

Specially formed glass coated assembly bars

Window arms 1500 mm

Long-life, heat and cold resistant EPDM gasket assembly

Glass dimensions narrowed by  ½ and ¼ at side edges

Aluminium ridge specially designed to hinge windows (suitable for expansion)

Wind connections

Aluminium side coating

Profiles designed suitable for horizontal assembly of glasses

Sub caps specially designed to collect rain waters.

ROUND TRANSMISSION GALVANIZE-DIP MANUFACTURING

Transmission shaft in our Venlo Glass Greenhouse system is the most reliable and most suitable material optimally absorbing the tension created by wind inside the greenhouse.  It is used as roof cross tie, mid column cross tie, side column cross tie, edge column cross tie and storm tie in shears. Transmission shafts are fully  hot-dip galvanized coated.

BOLTS AND NUTS USED IN THE CONSTRUCTION

Qualities:

- All of the bolts and nuts used are of 8.8 quality.

- Traction resistance is 8x100=800 Newton/mm2 at 8.8.

- For 8.8 bolt;

1) Flowing Tension = 8 x 8 x 10 =640 MPa

2) Traction Tension = 8 x 100 x 10 =800 MPa

- All nuts used are of fibre.

 

QUALITIES OF MATERIALS TO BE USED IN GREENHOUSE

 

Tunnel Width

8 mt.

Number of Tunnel

100 pieces in total

Side column interval

2.50 mt.

Intermediate column interval

5.00 mt.

Sub-gutter Height

6.00 mt.

Hill Height

7.00 mt.

Shear interval

12500 mm

Wind load

120 km/hour

Side Columns

80x140x3mm

Middle Columns

80x140x3mm

Front Façade Columns

80x140x3mm

Shear Spring Pipe

60 x 30 x 2,00 mm 

Shear Supports

Ø 14 mm Full round tie

Rain Gutter

Aluminium gutter

Connections

Our specially manufactured galvanized connectors consisting of 3 and 4 mm.

Bolts and Nuts

Steel bolts and nuts consisting of metric 8 -M 6 in European norms.

Anchorage Profiles ANCHORAGE PROFILES

70x120x4mm

 

VENTILATION SYSTEMS

Ventilations will be controlled by switches. Rear motor ventilation is %2x25, and takes up 50% of the ground surface. Butterfly ventilation is 2x1.2 meters, and its opening distance is 1 meter 20 cm.

As per the system divided in project dimensions

Mechanism propulsion motors: 3 ph. 400 v. safety switch is suitable for reducer automation.

Motor connection bearings: steel plates

Shaft propulsion system: steel rack gear

Ventilation propulsion shaft: Ø 32 mm. steel pipe

Window opening arms: Ø 25 mm. steel pipe

Shaft bearings:    pvc pulley, steel

Connections: steel bolt and fibre nuts

Custom manufactured ventilation motors have 2 years of guarantee. They are of 600 Newton power. They are produced in European standards and subject to 100% quality control. Reducer output revolution is 3/1 minute. Reducer has 4 switches, 2 of which are stop-start switches, and the other 2 of which are safety switches. Reducers to be used are of export quality, and have TSEK certificate. They are of 0,55 kv X 380 V X 1400 dd.

 
 
Request form
Name
Order amount
E-Mail
Telephone
Adress
South wall
Eastern front
Cargo Preference
Message
 
 
 
Ziyaret Bilgileri
Aktif Ziyaretçi2
Bugün Toplam65
Toplam Ziyaret60425
Döviz Bilgileri
AlışSatış
Dolar5.67445.6971
Euro6.34556.3709
Hava Durumu
Anlık
Yarın
28° 31° 24°
Saat